VOLVO
ECM-P212186 - Throttle/Pedal Position Sensor/Switch D Circuit Range/Performance. Bus Signal / Message Failures. Signal invalid
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module monitors the accelerator pedal position sensor, and the code is set when the signal from the analogue position sensor shows an incorrect pedal position. The fault may lie in the signal wire, in the supply wire, which is either broken or shorted, or in the pedal sensor itself.
Mulige årsaker
- An open circuit in the signal wire
- The signal wire is short-circuited to ground
- The signal wire is short-circuited to supply voltage
- The sensor's supply feed is short-circuited to ground
- The sensor's supply feed is short-circuited to supply voltage
- Damaged accelerator pedal position sensor
Hva du kan gjøre
- 1Check that the fuses are intact
- 2If you have a diagnostic tool, read the pedal position in live data while pressing and releasing the pedal slowly, and check that the values change smoothly and match each other
- 3Check the connectors at the pedal sensor and the engine control module for contact resistance and oxidation
- 4Look for breaks and chafing in the supply and ground wires to the sensor, and use a multimeter to confirm the supply is normal battery voltage
- 5If the fault remains, have a workshop with diagnostic equipment check the pedal sensor and its wiring
Symptomer du kan merke3
- A text message and a warning symbol appear in the display
- The engine lacks power and performs poorly
- The engine hesitates or surges, and it is unclear when
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.