VOLVO
ECM-P212300 - Throttle/Pedal Position Sensor/Switch D Circuit High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (42)
- Volvo C30 (2007–2013)2011–2013Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Kun motor: B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D4204T5
- Volvo S80 (2007–)2009Kun motor: D5244T10
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2, B8444S, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S, D5204T2, D5244T10
- Volvo S80 (2007–)2012Kun motor: B6304T4, B6324S4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7, D4162T, D4204T5
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4162T, D4204T5
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014Alle motorer unntatt: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle motorer unntatt: B4164T, D4162T
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Kun motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D4204T5
- Volvo V60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2009Kun motor: D5244T10
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Kun motor: B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012Kun motor: B6304T4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Alle motorer unntatt: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T7, D4162T, D4204T5
- Volvo V70 (2008–)2015Alle motorer unntatt: B4164T, B4164T2, D4162T, D4204T5
- Volvo XC60 (2009–)2010Alle motorer unntatt: B4204T6
- Volvo XC60 (2009–)2011–2012Alle motorer unntatt: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7
- Volvo XC60 (2009–)2014–2015Alle motorer unntatt: B4204T7, D4204T5
- Volvo XC70 (2008–)2010–2013
- Volvo XC70 (2008–)2014–2015Alle motorer unntatt: D4204T5
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module checks the PWM signal from the accelerator pedal position sensor and has registered that it is too high. The fault may lie in the signal wire, in the supply wire or in the pedal sensor itself.
Mulige årsaker
- An open circuit in the signal wire
- The signal wire is short-circuited to ground
- The signal wire is short-circuited to supply voltage
- The supply wire is short-circuited to ground or supply voltage
- An open circuit in the ground wire
- Damaged accelerator pedal position sensor
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read the code with the ignition on and see whether it is still active
- 3With the ignition off, look for chafing and breaks in the signal wire and the ground wire to the pedal sensor
- 4Use a multimeter to confirm the signal wire has no contact with supply voltage when the ignition is off
- 5If the fault remains, have a workshop with diagnostic equipment check the pedal sensor and the engine control module
Symptomer du kan merke4
- A text message and a warning symbol appear in the display
- The engine hesitates or surges, and it is unclear when
- A message appears in the information display
- The accelerator pedal is ignored during braking
Hva feilen kan påvirke3
- The analogue signal over CAN takes the place of the PWM signal
- If the brake pedal is pressed down at the same time, the pedal is treated as released
- Performance drops if the fault remains for a long time
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.