Hva betyr feilkode ECM-P21252F?

Diagnose og feilkodedefinisjon for ECM-P21252F (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P21252F - Throttle/Pedal Position Sensor/Switch E Circuit. General Signal Failures. Signal erratic

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

3 modeller

S60 (2011–), S80 (2007–), V70 (2008–)

Vis modeller per årsmodell og motor (9)

Hva betyr feilkoden?

The central electronic module (CEM) has sent a fault message to the engine control module (ECM) reporting that the accelerator pedal signal is erratic. The signal itself may be unstable, or the CAN communication between the modules may be faulty. This is a follow-on code from CEM, so the CEM fault should be fixed first and this code erased afterwards.

Mulige årsaker

Unstable signal from the accelerator pedal sensor
Fault in the central electronic module (CEM)
Fault in the CAN communication between CEM and the engine control module

Hva du kan gjøre

1Read the fault codes in the central electronic module (CEM) first, as the root fault is there
2Troubleshoot and fix the CEM faults as needed, starting with fuses and connectors
3Erase the code in the engine control module once the CEM faults are gone, then road test the car to check that it does not come back
4If you have a diagnostic tool, check whether the accelerator pedal value in live data jumps or stutters as the pedal is moved slowly up and down

Symptomer du kan merke2

Poor response from the accelerator pedal
Cruise control does not work at all

Hva feilen kan påvirke1

The accelerator pedal is out of action when the brake pedal is pressed

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.