VOLVO
ECM-P212568 - Throttle/Pedal Position Sensor/Switch E Circuit. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
This is an event-controlled information code. It does not mean that the control module where it is active has a fault; it is there for information. The code shows that a message from the central electronic module (CEM) about the accelerator pedal signal or the CAN communication has reached the engine control module. If the code is on its own, there is no fault that needs fixing.
Mulige årsaker
- This code does not stem from a fault needing action, unless another fault code is set alongside it
- The fault the message refers to is in the central electronic module (CEM)
Hva du kan gjøre
- 1Read the fault codes in both the engine control module and the central electronic module (CEM) and see whether this code is on its own
- 2If it is on its own there is no fault to fix, because there is no fault-tracing for this code itself
- 3If another fault code is stored with it, fix that one first, starting with the faults in CEM
- 4If you have a diagnostic tool and other codes are present, read the accelerator pedal value in live data and check that it follows the pedal movement
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.