VOLVO
ECM-P212700 - Throttle/Pedal Position Sensor/Switch E Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (42)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Kun motor: B6304T4, D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: B6304T4, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4204T5
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4204T5
- Volvo S80 (2007–)2008Kun motor: D4204T
- Volvo S80 (2007–)2009Kun motor: D4204T, D5244T10
- Volvo S80 (2007–)2010Alle motorer unntatt: B4204S3, B4204S4, B4204T6, B5254T10, B5254T11, B5254T8, D4164T
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S, D5204T2, D5244T10
- Volvo S80 (2007–)2012Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7, B5254T10
- Volvo S80 (2007–)2013Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7, D4204T5
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4204T5
- Volvo V40 (2013–)2013–2014Kun motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: B6304T4, D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012–2013Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4204T5
- Volvo V60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Kun motor: D4204T
- Volvo V70 (2008–)2009Kun motor: D4204T, D5244T10
- Volvo V70 (2008–)2010Alle motorer unntatt: B4204S3, B4204S4, B4204T6, B5254T10, B5254T11, D4164T
- Volvo V70 (2008–)2011Kun motor: B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012Alle motorer unntatt: B4164T, B4164T2, B4204T7, B5254T10
- Volvo V70 (2008–)2013Alle motorer unntatt: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T7, D4204T5
- Volvo V70 (2008–)2015Alle motorer unntatt: B4164T, B4164T2, D4204T5
- Volvo XC60 (2009–)2010Alle motorer unntatt: B4204T6
- Volvo XC60 (2009–)2011–2012Alle motorer unntatt: B4204T6, B4204T7
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7
- Volvo XC60 (2009–)2014–2015Alle motorer unntatt: B4204T7, D4204T5
- Volvo XC70 (2008–)2010–2013
- Volvo XC70 (2008–)2014–2015Alle motorer unntatt: D4204T5
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module (ECM) receives the analogue accelerator pedal signal via the central electronic module (CEM) on the CAN network, and compares it with the PWM signal that runs directly to the ECM. The code is set when the analogue signal is too low. Because the signal passes through CEM, that module should be checked first.
Mulige årsaker
- Fault in the central electronic module (CEM)
- Fault on the CAN link between ECM and CEM
- The analogue signal is missing or incorrect
- Terminals with high resistance, oxidation or a loose fit
- Open circuit or short to ground in the signal cable
- Damaged accelerator pedal position sensor
Hva du kan gjøre
- 1Read the fault codes in the central electronic module (CEM) first, since CEM registers the pedal signal and passes it on
- 2Fix any fault codes for the pedal sensor in CEM first, then erase the code in the engine control module
- 3Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 4Check the connectors at the pedal sensor and CEM for loose contacts, contact resistance and oxidation, and see that the wires have no open circuit
- 5Use a multimeter to check that the signal wire and the ground wire to the pedal sensor have no open circuit
- 6With a diagnostic tool, read the pedal value in live data while the pedal is pressed and released; the value should follow the pedal movement
Symptomer du kan merke4
- Yellow warning symbol and a message in the display
- The car has poor performance and lacks power
- Poor performance and lack of power especially when pulling away from rest
- The accelerator pedal is ignored when braking
Hva feilen kan påvirke3
- Engine torque may be limited
- The control module treats the pedal as released when the brake pedal is pressed at the same time
- Vehicle performance is limited if the fault persists for a long period
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.