VOLVO
ECM-P213586 - Throttle/Pedal Position Sensor/Switch A / B Voltage Correlation. Bus Signal / Message Failures. Signal invalid
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module (ECM) compares the PWM signal with the analogue signal from the pedal, and the code is set when the difference between the two becomes too great. The fault may lie in the connectors, the ground or signal wire, or the sensor itself.
Mulige årsaker
- Poor contact, contact resistance or oxidation at the pedal sensor connections
- Open circuit in the ground wire
- Fault in the pedal sensor PWM signal
- Fault in the pedal sensor analogue signal
- Open circuit in the signal ground wire
- Damaged accelerator pedal sensor
Hva du kan gjøre
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Check the connectors at the pedal sensor and the engine control module for loose contacts, contact resistance and oxidation
- 3Use a multimeter to check that the ground lead to the pedal sensor has no open circuit
- 4With a diagnostic tool, read both pedal signals in live data while the pedal is pressed and released; they should follow each other
- 5Use a multimeter to check that the supply to the pedal sensor has no open circuit
- 6Replace the pedal sensor first only if the other checks show nothing
Symptomer du kan merke3
- Yellow warning symbol and a message in the display
- The car has poor performance and lacks power, especially when pulling away
- The engine hesitates, surges or runs jerkily
Hva feilen kan påvirke1
- Engine output is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.