ECM-P213800 - Throttle/Pedal Position Sensor/Switch D / E Voltage Correlation. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (30)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2013
- Volvo S60 (2011–)2014–2015Alle motorer unntatt: D4204T5
- Volvo S80 (2007–)2007Kun motor: B5254T6
- Volvo S80 (2007–)2008Kun motor: B4204S3, B4204S4, B5254T6, D4204T
- Volvo S80 (2007–)2009Alle motorer unntatt: B6304T2, B6324S, B8444S, D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Alle motorer unntatt: D4164T
- Volvo S80 (2007–)2012–2013
- Volvo S80 (2007–)2014–2015Alle motorer unntatt: D4204T5
- Volvo V40 (2013–)2013–2014
- Volvo V40 (2013–)2015Alle motorer unntatt: D4204T14
- Volvo V40 Cross Country (2013–)2013–2014
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: D4204T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2013
- Volvo V60 (2011–)2014–2015Alle motorer unntatt: D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Kun motor: B4204S3, B4204S4, B5254T6, D4204T
- Volvo V70 (2008–)2009Alle motorer unntatt: B6304T2, B6324S, D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Alle motorer unntatt: D4164T
- Volvo V70 (2008–)2012–2013
- Volvo V70 (2008–)2014–2015Alle motorer unntatt: D4204T5
- Volvo XC60 (2009–)2010–2013
- Volvo XC60 (2009–)2014–2015Alle motorer unntatt: D4204T5
- Volvo XC70 (2008–)2010–2013
- Volvo XC70 (2008–)2014–2015Alle motorer unntatt: D4204T5
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module (ECM) monitors two pedal signals, PWM and analogue. The code is set when the PWM signal is faulty or the difference between the two signals is too great. The fault may lie in the pedal sensor, its connectors, the ground wire or the CAN network. The code can also follow from another fault code stored in the control module.
Mulige årsaker
- Contact resistance or oxidation in the connections between the pedal sensor and the engine control module
- Damaged accelerator pedal sensor
- Fault in the CAN communication between the engine control module and CEM
- Fault in the pedal sensor PWM signal
- Open circuit in the ground lead
- The fault may be caused by another fault code stored in the control module
Hva du kan gjøre
- 1With a diagnostic tool, read the pedal value in live data while the pedal is pressed and released; the value should follow the movement
- 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 3Check the connectors at the pedal sensor and the engine control module for contact resistance and oxidation
- 4Use a multimeter to check that the ground lead to the pedal sensor has no open circuit
- 5Have a workshop with diagnostic equipment check the CAN wires for open circuit and short circuit
- 6If these checks show no other fault and the fault remains, the pedal sensor may need replacing
Symptomer du kan merke4
- Poor response from the accelerator pedal
- Cruise control does not work at all
- Yellow warning symbol and a message in the display
- Accelerator pedal ignored when braking
Hva feilen kan påvirke3
- The accelerator pedal stops working while the brake pedal is pressed
- Engine torque and output may be limited
- The speed limiter is not available
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.