VOLVO
ECM-P213886 - Throttle/Pedal Position Sensor/Switch D / E Voltage Correlation. Bus Signal / Message Failures. Signal invalid
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
12 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (40)
- Volvo C30 (2007–2013)2011–2013Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Kun motor: D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Kun motor: D5244T10
- Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Kun motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Kun motor: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Kun motor: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Kun motor: D5204T6
- Volvo V50 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: D5204T2, D5244T10
- Volvo V60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Kun motor: D5244T10
- Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Kun motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle motorer unntatt: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Hva betyr feilkoden?
The engine control module (ECM) compares the PWM signal with the analogue signal from the pedal sensor, and the code is set when the difference between them becomes too great. The fault may lie in the pedal sensor, its connectors, the ground wire or the wires of the CAN network.
Mulige årsaker
- Poor contact or oxidation in the pedal sensor connections
- Open circuit in the ground wire or the signal ground wire
- Fault in the pedal sensor PWM signal
- Fault in the pedal sensor analogue signal
- Damaged accelerator pedal sensor
- Open or short circuit between the CAN network wires
Hva du kan gjøre
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Check the connectors at the pedal sensor and the engine control module for contact resistance and oxidation, and make sure none is loose
- 3Use a multimeter to check that the ground lead to the pedal sensor has no open circuit
- 4With a diagnostic tool, read the pedal value in live data while the pedal is pressed and released, and check that it follows the movement
- 5Have a workshop with diagnostic equipment check the CAN network wires for open circuit and short circuit
- 6Replace the pedal sensor first only if the other checks show no other fault
Symptomer du kan merke3
- Yellow warning symbol and a message in the display
- The car lacks power
- The engine hesitates, surges or runs jerkily during acceleration or deceleration
Hva feilen kan påvirke1
- Engine output may be limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.