Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P214800
    VOLVO

    ECM-P214800 - Fuel Injector Group "A" Supply Voltage Circuit High. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
    • Volvo V40 (2013–)2015Kun motor: B4204T11
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
    • Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11

    Hva betyr feilkoden?

    The injectors in group A and their voltage supply to the output stages are checked by the engine control module (ECM). The code is set when the signal is incorrect, here with a supply voltage that is too high. The code points to an internal fault in the engine control module.

    Mulige årsaker

    • Internal fault in the engine control module

    Hva du kan gjøre

    1. 1Check that the battery terminals are tight, since the code concerns the voltage supply to the injectors
    2. 2Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    3. 3Check the connectors at the engine control module and at the group A injectors for loose connections and oxidation
    4. 4With a diagnostic tool, activate the group A injectors and listen for them working in step
    5. 5Erase the code and road test the car to see whether it returns
    6. 6Have a workshop with diagnostic equipment decide whether the engine control module is faulty, since the code can be caused by an internal fault

    Symptomer du kan merke1

    • The malfunction indicator lamp lights up or behaves abnormally

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.