VOLVO
ECM-P215B62 - Vehicle Speed / Output Shaft Speed Correlation. Algorithm Based Failures. Signal compare failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The ECM checks the main speed value from brake control (BCM) against the reference from transmission control (TCM). The code is set when the main value strays too far from the reference. The fault lies in the signal that TCM sends, and the code can only be erased once the TCM fault is fixed.
Mulige årsaker
- Faulty speed signal from transmission control (TCM)
Hva du kan gjøre
- 1Read the fault codes in the transmission control module (TCM) first, since the root fault is there
- 2Fix the fault in TCM and then erase the code in the engine control module
- 3Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 4With a diagnostic tool, compare the TCM and BCM speed values in live data while the car is rolling
- 5Check the connectors at the engine control module and the transmission control module for loose connections and oxidation
- 6Road test the car after the repair and check that the idle is smooth and that the code does not return
Symptomer du kan merke1
- Uneven idle
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.