VOLVO
ECM-P217700 - System Too Lean Off Idle - Bank 1. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) adjusts the fuel injection from the lambda sensor reading to keep the mixture at λ=1. The code is set when that adjustment has to be made close to its maximum in the lower or upper part-load range, meaning the mixture runs too lean. The fault may lie in a leak, the mass air flow sensor, the fuel pressure, the lambda sensor or the injectors.
Mulige årsaker
- Air leakage in the intake system before the turbo
- Damaged mass air flow (MAF) sensor
- Air leakage in the exhaust system
- Low fuel pressure
- Damaged heated oxygen sensor (HO2S)
- Damaged or incorrect type of injectors
Hva du kan gjøre
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Look for leaks between the mass air flow sensor and the turbocharger, and check the hoses for cracks and loose clamps
- 3Check the exhaust system for air leakage
- 4Check that the mass air flow sensor is not damaged or dirty, and that its connectors and wiring are intact
- 5Think back on how the car has been refuelled; fuel with too high an ethanol content can cause this code, so have a workshop check the ethanol calculation
- 6Replace the lambda sensor if nothing above cures the fault, since a damaged lambda sensor can also set this code
Symptomer du kan merke1
- The malfunction indicator lamp lights up or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.