Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P218722
    VOLVO

    ECM-P218722 - System Too Lean at Idle - Bank 1. General Signal Failures. Signal too high

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    3 modeller

    S60 (2011–), S80 (2007–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2012Kun motor: B5254T5
    • Volvo S80 (2007–)2007–2008Kun motor: B5254T6
    • Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Kun motor: B5254T10
    • Volvo V70 (2008–)2008Kun motor: B5254T6
    • Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Kun motor: B5254T10

    Hva betyr feilkoden?

    The engine control module (ECM) adjusts injection from the lambda sensor reading. The code is set when the correction has to be close to its maximum at idle and the signal is too high. The fault may lie in the fuel, a leak in the intake, the injectors, the lambda sensor or the calculated ethanol content.

    Mulige årsaker

    • Too high an ethanol content in the fuel
    • Air leakage in the intake system
    • Damaged or incorrect type of injectors
    • Damaged heated oxygen sensor (HO2S)
    • Incorrectly calculated ethanol content

    Hva du kan gjøre

    1. 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
    2. 2Check the intake system for leaks, including through the EVAP valve, the secondary air solenoid valve and the brake booster
    3. 3Think back on how the car has been refuelled; if the car may have been filled with too high an ethanol content, have a workshop measure the ethanol content of the fuel
    4. 4Have a workshop confirm that the injectors are intact and of the correct type
    5. 5Start the engine, let it idle for a while and listen for air leaks
    6. 6Replace the lambda sensor if nothing above cures the fault, since a damaged lambda sensor can also set this code

    Symptomer du kan merke4

    • The malfunction indicator lamp (MIL) is lit
    • The car hesitates or surges when accelerating
    • The idle is uneven
    • The engine does not start and only cranks

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.