VOLVO
ECM-P218800 - System Too Rich at Idle - Bank 1. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) adjusts injection from the lambda sensor reading. The code is set when the correction has to be made close to its maximum at idle. The fault may lie in the mass air flow sensor, leaking injectors, the engine oil or oil level, the lambda sensor or the calculated ethanol content.
Mulige årsaker
- Damaged mass air flow (MAF) sensor
- Leaking injectors
- Contaminated engine oil
- Oil level too high
- Damaged heated oxygen sensor (HO2S)
- Incorrectly calculated ethanol content
Hva du kan gjøre
- 1Check that the fuses are intact; their locations are in the owner's manual or on the fuse box cover
- 2Have a workshop measure the fuel and residual pressure to see whether the injectors leak
- 3Look at the dipstick, where the oil should sit between the two marks, and check the oil for dirt
- 4Look for leaks between the throttle body and the cylinder head
- 5Think back on how the car has been refuelled; and have a workshop check the ethanol calculation if it may be wrong
- 6Replace the lambda sensor if nothing above cures the fault, since a damaged lambda sensor can also set this code
Symptomer du kan merke1
- The malfunction indicator lamp lights up or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.