VOLVO
ECM-P222792 - Barometric Pressure Sensor A Circuit Range/Performance. Component Failures. Performance or incorrect operation
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (24)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S
- Volvo S80 (2007–)2011–2012, 2015Kun motor: B6304T4, B6324S5
- Volvo S80 (2007–)2013–2014Kun motor: B5254T12, B5254T14, B6304T4, B6324S5
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Kun motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S
- Volvo XC60 (2009–)2011–2014Kun motor: B6304T4, B6324S5
- Volvo XC60 (2009–)2015Kun motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S5
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2011–2015Kun motor: B6304T4, B6324S5
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The module compares the filtered signal from the sensor to the intake manifold with the signal from its own atmospheric pressure sensor. The code is set when the difference between the two signals becomes larger than allowed, and it can only be checked once the ignition has been on for a while.
Mulige årsaker
- Damaged manifold absolute pressure (MAP) sensor
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1First check whether other air pressure codes are stored, both for the internal sensor and the intake manifold sensor. Diagnose those before this code
- 2With a diagnostic tool, read the pressure values in live data with the ignition on and see whether the intake sensor and the internal sensor show roughly the same pressure
- 3Check the wiring and connectors to the intake manifold sensor for contact resistance, oxidation, shorts to earth or voltage, and breaks
- 4Try a new intake manifold sensor and check whether the difference between the sensors disappears
- 5If the difference remains, the module's internal sensor is damaged. It cannot be replaced alone, so have a workshop replace the module
Symptomer du kan merke1
- Check engine lamp comes on or behaves abnormally
Hva feilen kan påvirke1
- The engine control uses the intake manifold sensor value if it is fault-free, otherwise a fixed fallback value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.