VOLVO
ECM-P222800 - Barometric Pressure Sensor A Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
12 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (41)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Kun motor: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Kun motor: D5244T10
- Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Kun motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Kun motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Kun motor: D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Kun motor: D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Kun motor: D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Kun motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Kun motor: D5244T10
- Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Kun motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Kun motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Alle motorer unntatt: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle motorer unntatt: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Hva betyr feilkoden?
The engine control module (ECM) continuously checks whether the signal from its built-in air pressure sensor is plausible. The code is set when the signal is faulty, here too low. The fault lies in the control module, which has registered an internal fault.
Mulige årsaker
- Internal fault inside the module
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1Read the code, note it and clear it. Then drive the car and read again to see whether it returns
- 2Check that the relevant fuses are intact
- 3If you have a diagnostic tool: have the engine control module run its internal test for the code and read the status when the test is complete
- 4If the code returns, the engine control module should be replaced. Have a workshop do the replacement
Symptomer du kan merke1
- Check engine lamp comes on or behaves abnormally
Hva feilen kan påvirke3
- The engine control uses the intake manifold sensor value if it is fault-free, otherwise a fixed value
- Exhaust gas recirculation (EGR) control is lost
- Burning of soot particles does not take place
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.