VOLVO
ECM-P223711 - O2 Sensor Positive Current Control Circuit / Open - Bank 1, Sensor 1. General Electrical Failures. Circuit short to ground
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The module registers that the pump current to the front heated oxygen sensor has stopped and that the sensor signal has therefore been set to a default value. Although the code is named as a short to earth, it applies to the pump current. The fault lies in the connections, the pump current wire or the sensor.
Mulige årsaker
- Contact resistance and oxidation in the terminals
- Open circuit in the pump current wire
- Damaged front heated oxygen sensor (HO2S)
Hva du kan gjøre
- 1Clear the code and drive the car. Then read again to see whether it comes back
- 2Check the oxygen sensor connector for contact resistance and oxidation. Do not use rust-dissolving spray or grease in the connector
- 3Use a multimeter on the pump current wire to check for a break. If possible, measure from the back of the contacts so they are not damaged
- 4If the wiring is in order, try a new oxygen sensor
- 5If the fault remains, have a workshop with diagnostic equipment diagnose further
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) lit
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.