VOLVO
ECM-P227000 - O2 Sensor Signal Stuck Lean - Bank 1, Sensor 2. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (40)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2007Kun motor: B8444S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012Kun motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2014Kun motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B4204T11, B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Kun motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Kun motor: B4204T11, B5204T9, B6304T4, B6324S5, D4204T5
- Volvo V70 (2008–)2015Kun motor: B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Alle motorer unntatt: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Alle motorer unntatt: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC90 (2003–)2008–2010Kun motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Kun motor: B6324S5
Hva betyr feilkoden?
The engine control module (ECM) continuously monitors the voltage from the rear heated oxygen sensor on bank 1, which is the cylinder row nearest the front with cylinders 1, 3, 5 and 7. The code is set when the voltage is not within the permitted range, and the signal has stuck in the lean position.
Mulige årsaker
- Contact resistance and oxidation in the connections
- Signal wire shorted to earth
- Open circuit in the signal wire
- Damaged rear oxygen sensor
- The oxygen sensor is not positioned in the exhaust flow
Hva du kan gjøre
- 1Start the engine, let it idle for a while, and then read the status of the code
- 2Check that the oxygen sensor is fitted securely in the exhaust pipe so that it sits in the exhaust flow
- 3Check the connectors to the rear oxygen sensor for contact resistance and oxidation. Rust-dissolving spray and grease should not be used in the connector
- 4Use a multimeter to check that the signal wire has no break and is not shorted to earth
- 5If the wiring is in order, try a new rear oxygen sensor. Have a workshop diagnose further if the fault remains
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) lit
Hva feilen kan påvirke2
- Rear oxygen sensor control is switched off
- The engine control uses a calculated value instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.