Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P227200
    VOLVO

    ECM-P227200 - O2 Sensor Signal Stuck Lean - Bank 2, Sensor 2. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (13)
    • Volvo S80 (2007–)2007Kun motor: B8444S
    • Volvo S80 (2007–)2008–2010Kun motor: B6324S, B8444S
    • Volvo S80 (2007–)2011Kun motor: B6324S5, B8444S
    • Volvo S80 (2007–)2012–2015Kun motor: B6324S5
    • Volvo V70 (2008–)2008–2010Kun motor: B6324S
    • Volvo V70 (2008–)2011–2014Kun motor: B6324S5
    • Volvo XC60 (2009–)2010Kun motor: B6324S
    • Volvo XC60 (2009–)2011–2015Kun motor: B6324S5
    • Volvo XC70 (2008–)2008–2010Kun motor: B6324S
    • Volvo XC70 (2008–)2011–2015Kun motor: B6324S5
    • Volvo XC90 (2003–)2008–2010Kun motor: B6324S, B8444S
    • Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
    • Volvo XC90 (2003–)2012–2014Kun motor: B6324S5

    Hva betyr feilkoden?

    The engine control module (ECM) continuously monitors the voltage from the rear heated oxygen sensor on bank 2, which is the rear cylinder row beside the passenger compartment, with cylinders 2, 4, 6 and 8. The code is set when the voltage falls outside the permitted range, and the signal has stuck in the lean position.

    Mulige årsaker

    • Contact resistance and oxidation in the connections
    • Signal wire shorted to earth
    • Open circuit in the signal wire
    • Damaged rear oxygen sensor

    Hva du kan gjøre

    1. 1Start the engine, let it idle for a while, and then read the status of the code
    2. 2Check the connectors to the rear oxygen sensor on bank 2 for contact resistance and oxidation. Rust-dissolving spray and grease should not be used
    3. 3Use a multimeter to check that the signal wire has no break and is not shorted to earth
    4. 4If the wiring is in order, try a new rear oxygen sensor
    5. 5If the fault remains, have a workshop diagnose further

    Symptomer du kan merke1

    • Malfunction indicator lamp (MIL) lit

    Hva feilen kan påvirke1

    • Rear oxygen sensor control is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.