VOLVO
ECM-P227500 - O2 Sensor Signal Stuck Rich - Bank 1, Sensor 3. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (15)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2010Kun motor: B6324S2
- Volvo S80 (2007–)2011–2013Kun motor: B6324S4
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B6324S4
- Volvo V40 (2013–)2015Kun motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2010Kun motor: B6324S2
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC60 (2009–)2010Kun motor: B6324S2
- Volvo XC60 (2009–)2011–2013Kun motor: B6324S4
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6324S4
- Volvo XC70 (2008–)2010Kun motor: B6324S2
- Volvo XC70 (2008–)2011–2013Kun motor: B6324S4
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, B6324S4
Hva betyr feilkoden?
The engine control module (ECM) continuously monitors the voltage from the rear heated oxygen sensor on bank 1, which is the cylinder row nearest the front with cylinders 1, 3, 5 and 7. The code concerns sensor 3 and is set when the voltage is not within the permitted range, here with the signal stuck in the rich position.
Mulige årsaker
- Signal wire shorted to supply voltage
- Internal fault in the rear oxygen sensor on bank 1, sensor 3
Hva du kan gjøre
- 1Start the engine, let it idle for a while, and then read the status of the code
- 2Use a multimeter to check that the signal wire is not shorted to supply voltage
- 3Check the connectors to the rear oxygen sensor for contact resistance and oxidation. Rust-dissolving spray and grease should not be used in the connector
- 4If the wiring is in order, try a new rear oxygen sensor
- 5If the fault remains, have a workshop diagnose further
Symptomer du kan merke1
- Malfunction indicator lamp (MIL) lit
Hva feilen kan påvirke1
- Rear oxygen sensor control is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.