VOLVO
ECM-P228400 - Injector Control Pressure Sensor Circuit Range/Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Kun motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
Hva betyr feilkoden?
The module reads how long each injection lasts and compares it with the requested time. The code is set when the two differ. The fault may lie in the control module or in a damaged nozzle in the injector.
Mulige årsaker
- Internal fault in the control module
- Damaged nozzle in the injector
Hva du kan gjøre
- 1Clear the code, drive the car and read again to see whether it returns
- 2If the code comes back, a workshop with diagnostic equipment needs to decide whether the injector nozzle or the control module is at fault
Symptomer du kan merke1
- Check engine lamp comes on or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.