VOLVO
ECM-P228807 - Injector Control Pressure Too High. General Failure Information. Mechanical Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The module checks high-side fuel pressure against the maximum allowed level. The pressure depends on engine load and speed, and the check is only made with the engine running. The code is set when fuel pressure is above the highest permitted level, and the fault is mechanical within the fuel system.
Mulige årsaker
- Fault in the fuel pump module (PEM)
- High-pressure pump is blocked
- Check valve in the intake manifold is blocked
- Air in the fuel system
Hva du kan gjøre
- 1Check the connector to the fuel pressure control valve for contact resistance, oxidation and breaks
- 2Use a multimeter to check that the wires to the fuel pressure control valve have no break and are not shorted to earth or supply voltage
- 3If the fault remains, have a workshop with diagnostic equipment check the fuel pump module, the high-pressure pump and the fuel system
Symptomer du kan merke2
- The engine does not start, or it cranks without starting
- Uneven idle
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.