Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P22907B
    VOLVO

    ECM-P22907B - Injector Control Pessure Too Low. Mechanical Failures. Low fluid level

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: D4204T5
    • Volvo S80 (2007–)2014–2015Kun motor: D4204T5
    • Volvo V40 (2013–)2015Kun motor: D4204T14
    • Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
    • Volvo V60 (2011–)2014–2015Kun motor: D4204T5
    • Volvo V70 (2008–)2014–2015Kun motor: D4204T5
    • Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
    • Volvo XC70 (2008–)2014–2015Kun motor: D4204T5

    Hva betyr feilkoden?

    The module checks fuel pressure on the high-pressure side against the lowest allowed level. The pressure depends on engine load and speed, and the check is only made with the engine running. The code is mechanical and is set when fuel pressure is below the lowest permitted level. A low fuel level in the tank is one of the things to check first.

    Mulige årsaker

    • Low fuel in the tank
    • Waxing of diesel at low fuel temperatures
    • The fuel pump control module (PEM) has no power supply
    • Fault in the fuel pump control module (PEM) or a wiring fault at the fuel flow control valve
    • Blocked fuel filter or leakage on the low-pressure side
    • Fault in the tank fuel pump, which gives too low pressure

    Hva du kan gjøre

    1. 1Check the fuel level in the tank first. If it is low, add fuel
    2. 2Check the connector to the fuel pressure control valve for contact resistance, oxidation and breaks
    3. 3Use a multimeter to check that the wires to the fuel pressure control valve have no break or short
    4. 4Check that the fuel filter is not blocked and that there is no leakage on the low-pressure side
    5. 5If the fault remains, have a workshop with diagnostic equipment check the fuel pump control module and the tank fuel pump

    Symptomer du kan merke5

    • The engine does not start, or it cranks without starting
    • The engine is hard to start and cranks slowly
    • Uneven idle
    • The engine stalls at idle or while driving, sometimes or all the time
    • Poor performance and lack of power

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.