Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P229964
    VOLVO

    ECM-P229964 - Brake Pedal Position/Accelerator Pedal Position Incompatible. Algorithm Based Failures. Signal plausibility failure

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    12 modeller

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (40)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D5204T, D5204T5
    • Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
    • Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
    • Volvo S40 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
    • Volvo S60 (2011–)2011Kun motor: D5204T2, D5244T10
    • Volvo S60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo S60 (2011–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
    • Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
    • Volvo S80 (2007–)2009Kun motor: D5244T10
    • Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
    • Volvo S80 (2007–)2011Kun motor: D5204T2, D5244T10
    • Volvo S80 (2007–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
    • Volvo S80 (2007–)2015Kun motor: D5204T3, D5244T15
    • Volvo V40 (2013–)2013–2014Kun motor: D5204T4, D5204T6
    • Volvo V40 (2013–)2015Kun motor: D5204T6
    • Volvo V40 Cross Country (2013–)2013–2014Kun motor: D5204T4, D5204T6
    • Volvo V40 Cross Country (2013–)2015Kun motor: D5204T6
    • Volvo V50 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
    • Volvo V60 (2011–)2011Kun motor: D5204T2, D5244T10
    • Volvo V60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo V60 (2011–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
    • Volvo V60 (2011–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
    • Volvo V60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
    • Volvo V70 (2008–)2009Kun motor: D5244T10
    • Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
    • Volvo V70 (2008–)2011Kun motor: D5204T2, D5244T10
    • Volvo V70 (2008–)2012Kun motor: D5204T3, D5244T11, D5244T15
    • Volvo V70 (2008–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
    • Volvo V70 (2008–)2014–2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
    • Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
    • Volvo XC60 (2009–)2011Kun motor: D5204T2, D5244T10, D5244T16
    • Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
    • Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
    • Volvo XC60 (2009–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
    • Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
    • Volvo XC70 (2008–)2011Kun motor: D5204T2, D5244T10, D5244T16
    • Volvo XC70 (2008–)2012–2013Alle motorer unntatt: B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2014–2015Kun motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17

    Hva betyr feilkoden?

    The module keeps watch on the accelerator pedal functions. The code is set when the two accelerator readings are implausible compared with each other.

    Mulige årsaker

    • Loose contact or contact resistance in the accelerator pedal switch
    • Wiring is shorted to earth or supply voltage
    • Open circuit in the cable to the accelerator pedal switch

    Hva du kan gjøre

    1. 1Clear the code, switch the ignition off and on, and read again to see whether it returns
    2. 2Check that the connector at the accelerator pedal is secure and not corroded
    3. 3Use a multimeter to check that the wires to the accelerator pedal switch have no break and are not shorted to earth or supply voltage
    4. 4If the fault remains, have a workshop with diagnostic equipment check the accelerator pedal
    5. 5Do not drive longer than necessary with the fault active, as the engine control then cannot rely on the accelerator pedal signals

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.