VOLVO
ECM-P230000 - Ignition Coil A Primary Control Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The module monitors the signal wire feeding the ignition coil's primary winding. The code concerns ignition coil 1 and is set when the signal to the primary winding is too low.
Mulige årsaker
- Signal wire shorted to earth
- Damaged ignition coil
Hva du kan gjøre
- 1Clear the code, drive the car and read again to see whether it returns
- 2Use a multimeter to check that the signal wire to ignition coil 1 is not shorted to earth
- 3If the wire is in order, ignition coil 1 may be damaged and need replacing
- 4If the fault remains, have a workshop with diagnostic equipment diagnose further
Symptomer du kan merke2
- Malfunction indicator lamp (MIL) lit
- Misfiring, so not every cylinder fires
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.