Hva betyr feilkode ECM-P240B00?

Diagnose og feilkodedefinisjon for ECM-P240B00 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P240B00 - Evaporative Emission System Leak Detection Pump Heater Circuit Low. General Failure Information. No sub type information

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

10 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

Vis modeller per årsmodell og motor (41)

Hva betyr feilkoden?

The engine control module (ECM) checks the control signal to the heater element in the leakage diagnosis pump and sets the code when it registers a fault in that signal. The fault that applies here is a short circuit to ground in the signal wire to the heater element.

Mulige årsaker

The signal wire to the heater element is short-circuited to ground
Damaged leakage diagnosis pump

Hva du kan gjøre

1Check that the relevant fuses are intact; their locations are shown in the car's owner's manual
2Read and clear the code, then check whether it returns
3Inspect the connector to the leak diagnostic unit for contact resistance, meaning loose contacts and oxidation
4Follow the signal wire to the heater element and look for chafing and pinching, especially where it may have touched the body
5Use a multimeter to check that the signal wire to the heater element has no contact with ground (the body)
6If the fault returns, have a workshop with diagnostic equipment check the leak diagnostic pump

Symptomer du kan merke2

The malfunction indicator lamp lights up
The engine warning lamp (Check engine) lights up or behaves abnormally

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.