VOLVO
ECM-P240F68 - Exhaust Gas Recirculation Slow Response. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
This code is event controlled and is meant as information, not as a sign that the engine control module (ECM) is faulty. The control module compares the EGR valve position sensor value with a desired value, and the code is set when it takes too long for the valve to reach the position requested.
Mulige årsaker
- The code is an information code and is not caused by any fault that needs to be remedied
Hva du kan gjøre
- 1The code is not a fault that needs remedying, so start by checking whether the symptoms are actually noticed when driving
- 2Check that the air intake and the hoses in the engine bay are not leaking and are undamaged
- 3If you have a diagnostic tool, read and clear the code and see whether it returns when the engine runs
- 4If the symptoms remain, have a workshop with diagnostic equipment check the EGR system
Symptomer du kan merke2
- Uneven idle
- The car runs poorly and lacks power
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.