VOLVO
ECM-P241400 - O2 Sensor Exhaust Sample Error Bank 1, Sensor 1. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (24)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B5254T5, D4162T
- Volvo S60 (2011–)2012Kun motor: B4164T, B4164T2, B4164T3, B5254T5, D4162T
- Volvo S60 (2011–)2013–2015Kun motor: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2011Kun motor: B4164T, B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B4164T, B4164T2, B5254T10, D4162T
- Volvo S80 (2007–)2013–2014Kun motor: B4164T, B4164T2, D4162T
- Volvo S80 (2007–)2015Kun motor: B4164T, D4162T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, D4162T
- Volvo V60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3, D4162T
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2011Kun motor: B4164T, B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B4164T, B4164T2, B5254T10, D4162T
- Volvo V70 (2008–)2013–2015Kun motor: B4164T, B4164T2, D4162T
Hva betyr feilkoden?
The engine control module (ECM) checks the signal from the front oxygen sensor, which measures the fuel/air mixture in the exhaust gases. The code is set when the signal is incorrect, for example if the sensor only indicates air and no mixture. The fault applies to bank 1 and sensor 1, that is, the front sensor on the first bank.
Mulige årsaker
- Incorrectly installed heated oxygen sensor
- Damaged front heated oxygen sensor
- Poor contact or oxidation at connectors or joints
- Damaged heated oxygen sensor
Hva du kan gjøre
- 1Check that the oxygen sensor is correctly installed in the exhaust system
- 2Inspect the oxygen sensor connector for loose contacts and oxidation. Do not use rust-solvent spray or grease in the connector
- 3Use a multimeter to check that the wires to the oxygen sensor have no open circuit
- 4If the fault remains after these checks, have a workshop try a new oxygen sensor
- 5If the fault still remains, have a workshop decide whether the engine control module has an internal fault, which is remedied by replacing the module
Symptomer du kan merke2
- The malfunction indicator lamp lights up
- The engine warning lamp (Check engine) lights up or behaves abnormally
Hva feilen kan påvirke2
- The oxygen sensor control is disabled
- The catalytic converter diagnostics are disabled
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.