VOLVO
ECM-P245316 - Diesel Particulate Filter Pressure Sensor "A" Circuit Range/Performance. General Electrical Failures. Circuit voltage below threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
Although the code is named circuit voltage below threshold, it applies when the zero-point adaptation of the particle filter pressure sensor is wrong. The control module measures the pressure upstream and downstream of the filter and monitors the sensor signal against a calculated value, and when there is a fault it uses a calculated value instead.
Mulige årsaker
- Contact resistance or oxidation in the connectors
- Damaged pressure sensor for the particle filter
- Pipes or hoses to the sensor are mixed up
- Pinched or folded hoses between the pressure sensor and the particle filter
Hva du kan gjøre
- 1Check that the connectors at the pressure sensor are firmly seated and free from contact resistance and oxidation
- 2Make sure the hoses to the pressure sensor are not swapped round, and look for pinched or folded hoses
- 3Use a multimeter to check that the signal wire from the pressure sensor has no contact with supply voltage
- 4If you have a diagnostic tool, read the adapted pressure difference across the particle filter in live data
- 5If the fault remains after a new service regeneration, have a workshop decide whether the particle filter needs replacing
Symptomer du kan merke1
- The engine warning lamp (Check engine) lights up or behaves abnormally
Hva feilen kan påvirke1
- The control module uses a calculated value instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.