VOLVO
ECM-P245400 - Diesel Particulate Filter Pressure Sensor A Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
12 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (41)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011Kun motor: D4162T, D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2009Kun motor: D5244T10
- Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Kun motor: D5204T2, D5244T10
- Volvo S80 (2007–)2012Kun motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Kun motor: D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: D4162T, D5204T4, D5204T6
- Volvo V40 (2013–)2015Kun motor: D4162T, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Kun motor: D4162T, D5204T6
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: D4162T, D5204T2, D5244T10
- Volvo V60 (2011–)2012Kun motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2009Kun motor: D5244T10
- Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Kun motor: D5204T2, D5244T10
- Volvo V70 (2008–)2012Kun motor: D4162T, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014Kun motor: D4162T, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo V70 (2008–)2015Alle motorer unntatt: B4164T, B4164T2, B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC60 (2009–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2011Kun motor: D5204T2, D5244T10, D5244T16
- Volvo XC70 (2008–)2012–2013Alle motorer unntatt: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Hva betyr feilkoden?
The code is set when the signal from the particle filter pressure sensor falls outside a set limit and is too low. The engine control module (ECM) measures the pressure upstream and downstream of the filter and checks the signal against a calculated value. The causes concern the wiring and connectors as well as the sensor itself.
Mulige årsaker
- Contact resistance or oxidation in the connections
- Signal wire short-circuited to ground
- Supply wire short-circuited to ground
- Damaged particle filter pressure sensor
Hva du kan gjøre
- 1Inspect the connections and wiring to the pressure sensor for looseness, contact resistance and oxidation
- 2Use a multimeter to check that the signal wire to the pressure sensor is not short-circuited to ground
- 3Use a multimeter to check that the supply voltage wire to the pressure sensor is not short-circuited to ground and has no open circuit
- 4If you have a diagnostic tool, read the adapted pressure difference across the particle filter in live data
- 5After replacing the pressure sensor, the control module needs its offset value reprogrammed for the new sensor; have a workshop do this with diagnostic equipment
Symptomer du kan merke4
- The car runs poorly and lacks power, even when pulling away from standstill
- The engine hesitates or surges during acceleration, deceleration or at steady speed
- The engine warning lamp (Check engine) lights up or behaves abnormally
- A warning symbol and a text message appear in the display
Hva feilen kan påvirke3
- Engine output, speed and torque are limited
- Exhaust gas recirculation (EGR) control is lost
- Burning of soot particles does not take place
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.