VOLVO
ECM-P24A700 - EGR Cooler Coolant Pump Control Circuit/Open. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module (ECM) monitors the pump that cools the EGR valve. The code is stored when the signal from the EGR cooler coolant pump is incorrect, and The causes are an open circuit in the signal wire or a defective coolant pump.
Mulige årsaker
- Open circuit in the signal wire
- Defective coolant pump for the EGR cooler
Hva du kan gjøre
- 1If you have a diagnostic tool, activate the coolant pump for the EGR cooler and listen for it to start
- 2Check that the relevant fuses are intact
- 3Check that the connector to the coolant pump is secure and free from oxidation and moisture
- 4Use a multimeter to check that the signal wire to the pump has no open circuit
- 5If the pump does not start or the fault remains, have a workshop with diagnostic equipment check the pump
Symptomer du kan merke1
- The Check engine lamp may come on or behave abnormally
Hva feilen kan påvirke1
- EGR control does not take place
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.