Hva betyr feilkode ECM-P250A00?

Diagnose og feilkodedefinisjon for ECM-P250A00 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo S80 (2007–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P250A00 - Engine Oil Level Sensor Circuit. General Failure Information. No sub type information

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

8 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–)

Vis modeller per årsmodell og motor (13)

Hva betyr feilkoden?

The ECM reads the oil level sensor signal. The code is stored when that signal is too high or too low, or when two consecutive readings differ by an unreasonable amount. The causes are open circuits in the power supply, the signal wire or the earth lead, or a damaged oil level sensor.

Mulige årsaker

Open circuit in the power supply
Open circuit in the signal wire
Open circuit in the earth lead
Damaged oil level sensor

Hva du kan gjøre

1If you have a diagnostic tool, read the oil level value in live data a few times with the engine running and see whether it jumps sharply between readings
2Check that the relevant fuses are intact
3Check the connector to the oil level sensor for contact resistance and oxidation
4Use a multimeter to check that the power supply, signal wire and earth lead to the oil level sensor have no open circuit
5If the fault remains after these checks, have a workshop with diagnostic equipment check the oil level sensor

Symptomer du kan merke1

No noticeable symptoms for the driver

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.