VOLVO
ECM-P250A16 - Engine Oil Level Sensor Circuit. General Electrical Failures. Circuit voltage below threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module (ECM) keeps track of the engine oil level and calculates an average value from it. The code is stored when that calculated average is incorrect. Possible causes are an oil level that is too low, poor contact or a damaged oil level sensor.
Mulige årsaker
- Oil level too low
- Contact resistance or oxidation in the terminals (see also ECM-P250A1C)
- Damaged oil level sensor
Hva du kan gjøre
- 1Check the oil level with the dipstick and top up with the correct oil if it is low
- 2Check that the relevant fuses are intact
- 3Check the connector to the oil level sensor for contact resistance and oxidation; clean and remedy it if needed
- 4If you have a diagnostic tool, read the fault status with the ignition on and see whether the fault is still active
- 5If the fault remains after these checks, have a workshop with diagnostic equipment check the oil level sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.