VOLVO
ECM-P250A17 - Engine Oil Level Sensor Circuit. General Electrical Failures. Circuit voltage above threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM keeps track of engine oil level. The code is stored when the calculated value falls outside its permitted range. Diesel can mix into the oil during particle filter regeneration, which raises the oil level, and then the code for low oil quality may be stored at the same time.
Mulige årsaker
- Oil level too high
Hva du kan gjøre
- 1Check the oil level with the dipstick to see whether it really is too high
- 2If the engine oil is diluted with diesel, an oil change is needed. If the level is too high, excess oil can be drained out
- 3Have a workshop adapt the control module's calculated oil level to the actual level after an oil change or draining
- 4If the code for low oil quality is also stored, they often have the same cause, so fault-trace them together
Symptomer du kan merke2
- Incorrect fluid level in the lubrication system
- Text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.