VOLVO
ECM-P250A1C - Engine Oil Level Sensor Circuit. General Electrical Failures. Circuit voltage out of range
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
Although the code is named circuit voltage out of range, it concerns the calculated average value of the engine oil level. The ECM monitors the oil level and stores the code when that average is incorrect.
Mulige årsaker
- Oil level too low
- Contact resistance or oxidation in the terminals (see also ECM-P250A16)
- Damaged oil level sensor
Hva du kan gjøre
- 1Read the fault status with the ignition on and note whether the fault is still active
- 2Check that the relevant fuses are intact
- 3Check the oil level with the dipstick and compare it with what seems reasonable for the car
- 4Check the connector to the oil level sensor for contact resistance and oxidation
- 5If the fault remains after these checks, have a workshop assess the oil level sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.