VOLVO
ECM-P250B64 - Engine Oil Level Sensor Circuit Intermittent/Erratic. Algorithm Based Failures. Signal plausibility failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The fault is recorded as intermittent, which means it has been present but is not necessarily present now. The ECM monitors the sensor output and stores the code when it falls outside a reasonable operating range. This may be caused by an oil level that is too high or a damaged oil level sensor.
Mulige årsaker
- Oil level too high
- Damaged oil level sensor
Hva du kan gjøre
- 1Read the fault status with the engine idling. If the code is not active, the fault may be sporadic
- 2Check the oil level with the dipstick and see whether it is above the marked level
- 3Check that the relevant fuses are intact
- 4If you have a diagnostic tool, read the oil level value in live data at idle and compare it with the dipstick
- 5If the fault returns, have a workshop with diagnostic equipment check the oil level sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.