VOLVO
ECM-P250C00 - Engine Oil Level Sensor Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (17)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2007Alle motorer unntatt: B5254T6, B6324S
- Volvo S80 (2007–)2008–2009Kun motor: B8444S, D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: B8444S
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC90 (2003–)2005–2011Kun motor: B8444S
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The oil level sensor sits in the oil pan and sends oil level information to the ECM. The code is stored when the oil level signal is abnormally low. Causes can be a very low oil level, a damaged sensor, or a signal cable shorted to supply voltage or to ground.
Mulige årsaker
- Extremely low oil level
- Damaged oil level sensor
- Signal cable short-circuited to supply voltage (see ECM-P250D00)
- Signal cable short-circuited to ground (see ECM-P250C00)
- Contact resistance or oxidation in the connectors
Hva du kan gjøre
- 1Check the oil level with the dipstick. If it is very low, top up the oil
- 2Check that the relevant fuses are intact
- 3Check the connector to the oil level sensor for contact resistance and oxidation
- 4Use a multimeter to check that the signal cable from the oil level sensor is not short-circuited to plus or to ground (body)
- 5If the fault remains after these checks, have a workshop with diagnostic equipment check the oil level sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.