VOLVO
ECM-P250C11 - Engine Oil Level Sensor Circuit Low. General Electrical Failures. Circuit short to ground
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The ECM monitors the sensor output. The code is stored when that output is missing, which may be caused by the signal cable being shorted to ground or by a damaged sensor.
Mulige årsaker
- Signal cable short-circuited to ground
- Damaged oil level sensor
Hva du kan gjøre
- 1Read the fault status with the engine running and note whether the fault is still active
- 2Check that the relevant fuses are intact
- 3Use a multimeter to check that the signal cable from the oil level sensor is not short-circuited to ground (body)
- 4Check that the connector to the oil level sensor is secure and clean
- 5If the fault remains after these checks, have a workshop with diagnostic equipment check the oil level sensor
Symptomer du kan merke1
- The oil pressure warning lamp comes on or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.