VOLVO
ECM-P250D12 - Engine Oil Level Sensor Circuit High. General Electrical Failures. Circuit short to battery
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The ECM checks the oil level sensor signal and stores the code when that signal is too high. This may be caused by a signal cable shorted to supply voltage or by a damaged sensor.
Mulige årsaker
- Signal cable short-circuited to supply voltage
- Damaged oil level sensor
Hva du kan gjøre
- 1Read the fault status with the engine running and note whether the fault is still active
- 2Check that the relevant fuses are intact
- 3Use a multimeter to check that the signal cable from the oil level sensor is not shorted to plus
- 4Check that the connector to the oil level sensor is secure and clean
- 5If the fault remains after these checks, have a workshop with diagnostic equipment check the oil level sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.