VOLVO
ECM-P251368 - Event Data Recorder Request Circuit High. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
This is an event-controlled information code and does not show a fault in the control module. It is set when the engine speed has been outside the limit for engine stop. The causes are given as an overloaded engine or an incorrectly calculated ethanol content.
Mulige årsaker
- No fault that needs remedying causes this; the code is informational.
- Overloaded engine
- Incorrectly calculated ethanol content
Hva du kan gjøre
- 1No special fault-tracing is needed for this code, since it is an information code
- 2If the engine has been heavily overloaded, this may explain the code
- 3Check that the fuel you have filled up with is of the type the car is intended for, since an unexpected ethanol content can give a wrong calculation
- 4If you have a diagnostic tool, read the fault status with the engine running to see whether the code is active now
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.