Hva betyr feilkode ECM-P252400?

Diagnose og feilkodedefinisjon for ECM-P252400 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P252400 - A/C Request B Circuit High. General Failure Information. No sub type information

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

12 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Vis modeller per årsmodell og motor (40)

Hva betyr feilkoden?

The engine control module drives the A/C compressor solenoid with PWM through an internal power stage and monitors the signal at its output. The code is stored when the signal is too high.

Mulige årsaker

Signal cable short-circuited to ground
Signal wire shorted to supply voltage
Ground wire shorted to supply voltage
Open circuit in the signal wire, ground wire or voltage supply
Damaged solenoid

Hva du kan gjøre

1Switch on A/C with the engine running and see whether the code returns
2Check that the relevant fuses are intact
3Use a multimeter to check that the signal cable to the A/C compressor is not short-circuited to plus
4Check that the ground cable to the A/C compressor is not shorted to plus and that the connectors are secure
5If the fault remains, have a workshop with diagnostic equipment check the solenoid in the A/C compressor

Symptomer du kan merke4

The air conditioning is not cold enough in the rear section
The air conditioning cools slowly in the rear section
The air conditioning is not cold enough in the front section
The air conditioning does not work

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.