VOLVO
ECM-P252700 - Vacuum Reservoir Pressure Sensor Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
Hva betyr feilkoden?
The ECM reads the brake vacuum sensor, which sits in the brake booster. The code is stored when the signal is too low for a certain period. Possible causes are a signal wire shorted to ground, an open circuit in the signal wire or a damaged sensor.
Mulige årsaker
- Signal cable short-circuited to ground
- Open circuit in the signal cable
- Damaged brake vacuum sensor
Hva du kan gjøre
- 1If you have a diagnostic tool, read the brake vacuum sensor value in live data with the engine running and see whether it changes when the brake pedal is pressed
- 2Check that the relevant fuses are intact
- 3Check the connector at the brake vacuum sensor for contact resistance and oxidation
- 4Use a multimeter to check that the signal wire to the brake vacuum sensor has no open circuit and is not short-circuited to ground (body)
- 5Have a workshop carry out the further checks of the brake vacuum sensor, since the brake booster is part of the braking system
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The automatic engine start/stop function is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.