VOLVO
ECM-P253300 - Ignition Switch Run/Start Position Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The ECM monitors the ignition position and the voltage levels at the inputs for the 15 and 50 supply. The code is stored when the ignition is in the start position but the ECM has never received voltage on the 15-supply input in position II. Possible causes are faulty circuits for the 15 or 50 supply.
Mulige årsaker
- Incorrect circuit for the 15 supply
- Incorrect circuit for the 50 supply
Hva du kan gjøre
- 1Check that the relevant fuses are intact
- 2Check that the ignition switch works in position II and in the start position, and that it can be moved between the positions
- 3Use a multimeter to check that the 15-supply is present in position II and the 50-supply is present in the start position
- 4Check the connectors to the engine control module for contact resistance and oxidation
- 5If the fault remains, have a workshop check the 15 and 50 supply circuits
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.