VOLVO
ECM-P261400 - Camshaft Position Output Circuit / Open. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellS60 (2011–)
Vis modeller per årsmodell og motor (1)
Hva betyr feilkoden?
The engine control module (ECM) monitors the signal from the camshaft position sensors for intake and exhaust. The code is set when the signal from both sensors is incorrect or missing, and it is always stored together with another signal-fault code for the camshaft position sensor.
Mulige årsaker
- No signal
- Faulty wiring to the camshaft position sensors
Hva du kan gjøre
- 1Read the codes and fix the separate signal-fault code for the camshaft position sensor first, since this code always comes with it
- 2Check the connectors to the intake and exhaust camshaft sensors for loose contacts and corrosion
- 3Check the sensor wiring for chafing and breaks
- 4If you have a diagnostic tool: check in live data that the camshaft sensor signal is present for both intake and exhaust
- 5If the code returns, have a workshop check whether the camshaft position sensor is damaged
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke3
- Camshaft control is switched off
- Diagnosis of camshaft control is switched off
- The basic boost pressure is used
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.