VOLVO
ECM-P262600 - O2 Sensor Positive Current Trim Circuit/Open Bank 1 Sensor 1. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
6 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (11)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Kun motor: B4164T
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Kun motor: B4164T
- Volvo V70 (2008–)2012–2015Kun motor: B4164T, B4164T2
Hva betyr feilkoden?
The engine control module (ECM) monitors the front oxygen sensor on bank 1. The code is set when the calibration current to the sensor has stopped and the sensor signal is implausibly high when fuel is cut off.
Mulige årsaker
- Contact resistance and oxidation at the connections
- Open circuit in the wire carrying the calibration current
- Damaged front oxygen sensor
Hva du kan gjøre
- 1Check the wire carrying the calibration current for a break
- 2Check the oxygen sensor connector for contact resistance and oxidation; do not use rust-solvent spray or grease in the connector
- 3If nothing is found, the engine control module may have an internal fault, which is fixed only by replacing it; have a workshop decide
Symptomer du kan merke1
- Check engine light comes on or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.