Hva betyr feilkode ECM-P263868?

Diagnose og feilkodedefinisjon for ECM-P263868 (Volvo C30 (2007–2013), Volvo C70 (2006–2013), Volvo C70 (2006–2013)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P263868 - Torque Management Feedback Signal A Range / Performance. Algorithm Based Failures. Event information

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

12 modeller

C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Vis modeller per årsmodell og motor (40)

Hva betyr feilkoden?

This is an event-controlled code. It is meant as information and does not indicate any defect in the module where it is active. The engine control module (ECM) monitors engine torque and sets the code when torque goes above a certain recommended level.

Mulige årsaker

Fault in the injection system
Faulty software in the engine control module
Damaged engine control module (ECM)

Hva du kan gjøre

1Read any other codes in the engine control module and deal with those first, since this code only shows that torque has been high
2Have a workshop with diagnostic equipment check the injection system
3If you have a diagnostic tool: read engine torque in live data and see whether it follows the accelerator
4If nothing is found, have a workshop check the software in the engine control module; it should only be reloaded if it was changed unintentionally or damaged

Symptomer du kan merke1

Text message and warning symbol in the display

Hva feilen kan påvirke2

Engine speed is limited
Torque is limited by cutting off the fuel supply

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.