VOLVO
ECM-P263E00 - Glow Plug Control Module 1 Over Temperature. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The ECM drives the glow plugs via glow plug control module 1. The code is set when the glow plug module's own temperature reading is too high. This can be caused by an ambient temperature that is too high or by a damaged glow plug control unit, and the glow plugs are then limited.
Mulige årsaker
- Ambient temperature too high
- Damaged glow plug control unit
Hva du kan gjøre
- 1With the ignition on, read whether the code is active or only stored
- 2Let the car cool down and then start it again to see whether the code returns
- 3If you have a diagnostic tool: read the glow plug module temperature in live data while the engine is cold
- 4If the code returns once the glow plug module has cooled, have a workshop decide whether it is damaged
Symptomer du kan merke2
- Engine is hard to start and cranks slowly
- Starting becomes harder in cold weather
Hva feilen kan påvirke1
- Glow plug operation is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.