Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P268012
    VOLVO

    ECM-P268012 - Coolant Degassing Valve Control Circuit High. General Electrical Failures. Circuit short to battery

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    6 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)

    Vis modeller per årsmodell og motor (11)
    • Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3
    • Volvo S60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
    • Volvo S80 (2007–)2011, 2015Kun motor: B4164T
    • Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2
    • Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
    • Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
    • Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3
    • Volvo V60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
    • Volvo V70 (2008–)2011Kun motor: B4164T
    • Volvo V70 (2008–)2012–2015Kun motor: B4164T, B4164T2

    Hva betyr feilkoden?

    The engine control module (ECM) drives the solenoid for the Degas valve, which regulates engine temperature more efficiently. The code is set when the signal is higher than a set level as the solenoid is activated. The cause may be a signal wire shorted to supply voltage, a damaged solenoid, a damaged connector or the engine control module.

    Mulige årsaker

    • Signal wire shorted to supply voltage
    • Damaged solenoid
    • Damaged connector
    • Damaged engine control module (ECM)

    Hva du kan gjøre

    1. 1Check that the fuse for the solenoid has not blown
    2. 2Use a multimeter to check that the signal wire to the solenoid has no contact with the positive supply
    3. 3Check the connector at the solenoid for damage
    4. 4If you have a diagnostic tool: read the control signal to the solenoid in live data when it is activated
    5. 5If nothing is found, have a workshop with diagnostic equipment decide whether the fault lies in the solenoid or the engine control module

    Symptomer du kan merke2

    • Air conditioning does not work
    • Heater does not work

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.