VOLVO
ECM-P268E06 - Cylinder 3 Injector Data Incompatible. General Failure Information. Algorithm Based Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module (ECM) checks the memory value that holds the data for cylinder 3's injector. The code is set when that value is incorrect, and the cause is an internal fault in the injector. The last value received from the injector is then used instead.
Mulige årsaker
- Internal malfunction within the injector
Hva du kan gjøre
- 1If you have a diagnostic tool, read whether the code is active or only stored
- 2If the code comes back, have a workshop with diagnostic equipment decide whether the injector for cylinder 3 needs replacing
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The last value received from the injector is used instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.