VOLVO
ECM-P269600 - Injector data incompatible. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
Each injector has a memory circuit with data about that particular injector. The code is set when the engine control module (ECM) cannot store the memory value from an injector, and it is tested with the engine running. The last stored value from the injector is then used.
Mulige årsaker
- Internal fault in the injector
Hva du kan gjøre
- 1Read the code with a diagnostic tool and check whether it is active or only stored
- 2Clear the code and run the engine; if it comes back, it is the same fault
- 3Have a workshop check the injectors, since the fault lies in an injector's own memory circuit
- 4If the workshop finds no fault in the injectors, ask them to check how the engine control module stores the injector values
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The engine control module keeps using the last stored value from the injector
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.