VOLVO
ECM-P30044B - Power Sustain Relay. System Internal Failures. Over temperature
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
Even though the code is named over temperature, it concerns the signal wire to the voltage supply relay, which the engine control module (ECM) monitors. The code is set when the signal wire is shorted or has an open circuit, and then voltage cannot be connected to the high voltage battery's contactors.
Mulige årsaker
- Mechanical fault on the relay
- Electrical fault on the relay
- Short circuit or open circuit in the wires to the relay
Hva du kan gjøre
- 1Check that the fuses are intact; their location is shown in the owner's manual
- 2Read the code with a diagnostic tool and check whether it is active or only stored
- 3Have a workshop check the relay and its wiring, since the high voltage system should only be handled by trained personnel
Symptomer du kan merke3
- The combustion engine runs in HYBRID mode more often than expected
- Temperature control or air conditioning does not work
- Warning symbol and text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.